Internal Duron Paint
Application
Duron Anti-Mould Acrylic hardtex internal paint can be
specifically used on all kind of surfaces and masonry building.
Internal Duron paint can also be used on internal wood work for
its excellent smooth finish.
Duron Paint is specifically made for walls that have mould
problems therefore it has a rich mixture to resist mould.
Resistance
Internal Duron paint can resist last longer life on walls and it is
easy to clean from hand marks and dust.
Instructions
Make sure that the area is clean from dust and flaking old walls and ceilings.
Do not paint on old flaking plastering and damp walls.
Important note: It is important to leave 1hr and a half to dry
between applications. For long lasting results, always use Duron
Cambond before painting which is suitable internally and externally.
Apply Duron with roller, paint brush or spray gun and mix paint
with 1:10 (one part water and ten parts paint).
We suggest that one shouldn’t use water, for long lasting results.
Make sure that between application process, you leave one and a half hours drying.
It is very recommended for homes and industrial use.
Duron Liquid Grip
Liquid grip can be mixed with all kind of gypsum plaster, plaster products with sand material, tile glue, plaster
for joints on stone finishing and lime plaster. Approximately with a bag of 20/25Kgs of plaster you’ll need 1180
ml liquid grip. Prepare your plaster mixture with water, mix for about 2 min, add liquid grip, then mix
everything for the another 2 min.
Application of Duron liquid grip on walls before plastering;
Before the above mentioned plastering method, customers can apply liquid grip direct on the
area they want to plaster by mixing 1 part of water with 4 parts of liquid grip (1:4) on area of
approximately 1 m²
Important to follow by rendering straight on it before it gets dry.
Available in 1180ml and 5litres.
Keep good ventilation during application.
Keep out of reach of children.
In case of contact with eyes, wash immediately with clean fresh water.
Remove any traces from skin with soap and water.
Duron Cambond
Cambond is a product that bonds the old paint on walls and ceiling to fresh paint. This product is highly
recommended where you have problems with old paint.
Application Instructions:
– Make sure that area is clean from dust and old flaking paint.
– Do not paint on old flaking plastering and damp walls.
– If using plastering make sure that you’ll leave it to dry for at least two days or until completely dry.
– Always use Cambond for anti-mold solution, before paint and leave it to dry for about two
and a half hours or more.
– You can apply Cambond with a paint brush, spray gun or roller.
– Cambond is suitable for both internal and external process.
Keep good ventilation during application.
Keep out of reach of children.
In case of contact with eyes, wash immediately with clean fresh water.
Remove any traces from skin with soap and water.
Duron Sandtex
This external paint can be used on all exterior surfaces.
It is a top quality, textured exterior finish based on a hardtex acrylic resin reinforced with silica and
micronized granite. Sandtex finish is due to the micronized granite sand; this gives a stronger thicker coating
to ordinary exterior paint and offers better protection and weather resistance.
Over 3,000 of colours are available in 10 litre and 5litre buckets.
Application process Make sure that surfaces are clean and dry.
We suggest the use of Duron Cambond as an appropriate primer before painting, this will act also as pre-
treatment for mould problems and flaking old paint to bond again to walls and ceiling.
Stir Duron Sandtex well before use. Apply by brush or roller or spray gun.
Keep good ventilation during application.
Keep out of reach of children.
In case of contact with eyes, wash immediately with clean fresh water.
Remove any traces from skin with soap and water.
Ideal for use on any water proof boards such as Water boards, Cement Board, bricks and limestone walls.
All surfaces must be free of dust & properly prepared.
Reds – Paint Colors by Family – Sherwin-Williams
<![if !IE]>
<![endif]>